"美氏M6361"酸性硅酮
密封膠是一種酸性固化的高性能密封膠:1)固化迅速;2)固化收縮率低;3)在低溫(-45℃)至高溫(+164℃)內保持良好彈性;4)柔軟抗震,耐變形;5)對于多數基材有良好的兼容性;6)用于各類
門窗安裝.
說明:
1)施工溫度在5°C~40°C之間;
2)用兩塊布法清潔基材;
3)將膠嘴按需要的大小做45°切斷;
4)將膠打滿接縫處;
5)10分鐘內結皮.
重要:
1)使用前請做材料相容性測試;
3)不用于
幕墻結構性裝配或表面溫度(45℃)以上的材料;
4)不用于滲出油污或溶劑的材料；
注意:
遠離兒童!
避免接觸眼睛和皮膚!
如有接觸,請用水沖洗;仍然不適的請就醫檢查.
執行標準: GB/T14683-2003.
保質期: 7個月(<24℃)
"MEISHI M6361" acidity silicone sealant is a acidic curing
high performance grade silicone sealant:1)Rapid
solidification;2)Low shrinkage on curing;3)Keep elastic in
low(-45℃) and high(+164℃) temperatures;4)High grade soft,be able to
bear oscillation;5)Good adhesion to many substrates;6)Applicable to
the assembly of various doors and windows.
DIRECTIONS:
1)Construction applicable between 5℃~40℃;
2)Substrates should be solvent cleaned using two clothes
method;
3)Cut the nozzle to desired opening at 45°angle ;
4)Fill the joint completely;
5)Formation of skin in 8 minutes.
IMPORTANT:
1)Please do material compatibility testing before use；
2)Not for copper,zinc and stone;
3)Do not use in structural applications or where surface
temperatures exceed 45℃ for material safety;
4)Incompatible oozing out oily or solvents;
5)Apply in Plenty of air.
PRECAUTIONS:
Keep out of the reach of children!
Avoid contact with eyes and skin!
In case of contact,flush with lot water;If still
indisposed,consult a doctor.
STANDARS: GB/T 14683-2003.
STORAGE: 7 Months(<24℃).
以上是供應優質硅酮酸性玻璃膠的詳細介紹，包括供應優質硅酮酸性玻璃膠的廠家、價格、型號、圖片、產地、品牌等信息!
