“美氏793A”耐候硅酮
密封膠是一種中性固化的
密封膠:1)不腐蝕基材;2)固化收縮率低;3)在低溫(-45°C)至高溫(+150°C)內保持一致彈性;4)柔軟抗震,耐變形;5)適合于
玻璃,
鋁材,
石材,
混凝土,
磚瓦,
陶瓷,塑料間的非結構性粘結密封.
說明:
1)施工溫度在5℃~40℃之間;
2)用兩塊布法清潔基材;
3)將膠嘴按需要的大小做45°切斷;
4)將膠打滿接縫處
5)約25分鐘結皮.
重要:
1)使用前請做材料相容性測試;
2)不用于結構性裝配或表面溫度(45°C)以上的材料;
3)不用于滲出油污或溶劑的材料.
注意:
遠離兒童!
避免接觸眼睛和皮膚!
如有接觸,請用水沖洗;仍然不適的請就醫檢查.
執行標準:GB/T14683-2003
保質期:7個月(<24℃)
“MEISHI793A” Weather proofing silicone sealant is a neutral
cure silicone sealant:1)Not corrosion to the materials;2)Low
shrinkage on curing;3)Keep elastic in low(-45℃) and high(+150℃)
temperatures; 4)High grade soft,be able to bear oscillation;
5)Suitable for glass,aluminum
material,stone,concrete,brick,ceramic,plastic,non-structural
sealing.
DIRECTIONS:
1)Construcation applycabie between 5℃~40℃;
2)Substrates should be solvent cleaned using two clothes
method;
3)Cut the nozzle to desired opening at 45°angle ;
4)Fill the joint completely;
5)Formation of skin in 25 minutes.
IMPORTANT:
1)Please do material compatibility testing before use；
2)Do not use in structural applications or where surface
temperatures exceed 45℃ for materialsafety;
3)Incompatible oozing out oily or solvents.
PRECAUTIONS:
Keep out of the reach of children!
Avoid contact with eyes and skin!
In case of contact,flush with lot water;If still
indisposed,consult a doctor.
STANDARS: GB/T14683-2003.
DURABILITY: 7 Months(<24℃).
以上是供應中性硅酮耐候膠黑色的詳細介紹，包括供應中性硅酮耐候膠黑色的廠家、價格、型號、圖片、產地、品牌等信息!
